SURFACE TISSUE
Fiberglass surface mat is mainly used for the surface layer of fiberglass products.
Divided into specific wound type S-BM (w) series, hand lay-type S-BM (H) series and pultrusion type S-BM (P) series of three categories.
Product Features:
-
Excellent fiber distribution
-
Smooth surface appearance of finished products
-
Corrosion resistant
-
Low binder content
-
Good molding properties
| Production No | Gum content（%） | Density (g/m2) | Roll Width(mm) | Longitudinal tensile strength | Moisture content（%） | |||||||||||||||||||||||||||||||||
| S-BM(W)-30 | 7 | 30 | Normal:1000 Range:50 ~ 3000 | ≥30 | ≤0.5 | |||||||||||||||||||||||||||||||||
| S-BM(W)-50 | 7 | 50 | Normal:1000 Range:50 ~ 3000 | ≥50 | ≤0.5 | |||||||||||||||||||||||||||||||||
| S-BM(H)-30 | 6 | 30 | Normal:1000 Range:50 ~ 3000 | ≥25 | ≤0.5 | |||||||||||||||||||||||||||||||||
| S-BM(H)-50 | 6 | 50 | Normal:1000 Range:50 ~ 3000 | ≥40 | ≤0.5 | |||||||||||||||||||||||||||||||||
| S-BM(P)-90 | 8 | 90 | Normal:1000 Range:50 ~ 3000 | ≥200 | ≤0.5 | |||||||||||||||||||||||||||||||||
